If you meet the issue, this post offered by MiniTool Solution provides multiple methods for you to fix it.
PC won’t boot to Windows 10, black screen with cursor
Sometimes, your laptop or PC screen suddenly goes black after the startup and you will get a black screen with cursor after login. In this post, I will provide you with a detailed guide to follow those fixes and also inform you about the reasons which trigger the problem. There are many people complaining that they run into a black screen after Windows 10 update. This matter has already caught the attention of Microsoft.
You should follow fix 2 to 7 in Safe Mode. The guidances are as follows:. Step 2: While the battery is out, press and hold the power button for 60 seconds. As updating your drivers is quite an easy task, it should be one of the first fixes you try.
Step 1: Open Device Manager. Next, expand Display adapters and right-click your graphics card to select Update driver. Step 2: Select Search automatically for updated driver software and let it finish the process. If the above steps were helpful in fixing the issue, you should exit and restart the PC. If not, then continue. Step 3: Again right-click your graphics card to select Update Driver.
This time on the next screen select Browse my computer for driver software.Blinking Cursor Black Screen Windows 10 - EASY FIX - Samsung RV520
Step 4: Now select Let me pick from a list of available drivers on my computer and click Next. Step 5: Finally, select the latest driver from the list and click Next. Let the above process finish and restart your PC. If not, continue with the next step.Go to Solution. It's possible that the disk-drive has "failed" -- the motherboard cannot read anything from the disk-drive, to start-up the "boot" process. To compare, a battery for a flashlight can be installed inside the flashlight, but, if it cannot supply any power to the flashlight, the flashlight does not produce any output.
Physically present, but not functional. Windows is installed on there I installed it on another computer, taking the HDD out and putting it with the other computer and installing it there since the power to the keyboard is slow and cant hit the bios setup what not till it was already past the bios screen So, are you saying that your disk-drive, removed from your first computer, and then connected to the second computer, works fine?
Does the boot-up show the "worm" crawling across the screen, or the "spinner", as Windows starts to boot? If you power-on the first computer, and leave it for 20 minutes, does it finally boot-up correctly? Experiment: take any "spare" disk-drive, connect it to the first computer, and try to install Windows onto it.
So, your symptom is that the motherboard is failing to read the first few blocks, the "boot sectors", from the disk-drive, at least on your first computer, or that the contents of those blocks no longer are "boot sectors". I don't know why the second computer is the only one that can read those "boot sectors", and fully boot into Windows.
Is the second computer booting from its own disk-drive, or from the disk-drive pulled from the first computer? So, you are saying that the first computer has NEVER booted into Windows while using a copy of Windows that was installed while connected to that first computer?
There is no need to "wipe" it -- as you install Windows, you have the option to delete each of the existing partitions, and then to install Windows onto the "unallocated" disk-space.
Didn't find what you were looking for? Ask the community. Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type. Showing results for. Search instead for. Did you mean:. Fix Windows 10 Update Issues.
Create an account on the HP Community to personalize your profile and ask a question. Your account also allows you to connect with HP support faster, access a personal dashboard to manage all of your devices in one place, view warranty information, case status and more. It has been a while since anyone has replied. Simply ask a new question if you would like to start the discussion again. All forum topics Previous Topic Next Topic. New member. Message 1 of HP Recommended.
Operating System: Microsoft Windows 10 bit. When I turn on the computer it is a black screen with a text cursor, underscore. Don't know what to do. Tags 1. Tags: Microsoft Windows 10 bit. Level Message 2 of When you power-on the computer, there is an option to launch the HP Hardware Diagnostics.
Select that option, and run the tests against the disk-drive.Amazingly, when it comes to computer errors, when your computer boots to black screen with blinking cursor is far better than just a plain blank screen when the computer boots. We have to look on the bright side here and presume that the fact that you can see a blinking cursor is a good sign.
At least we can treat this as a bit of clue on what to try when troubleshooting this black screen on start up. When the average computer user sees a black screen on startup appear on their computer monitor panic immediately sets in. Both black screens and blues screens are known disasters that are dreaded by most. But as I said, seeing a black screen with a flashing cursor is not that bad. Please note that this particular error has stopped your computer from entering Windows.
It is not a black screen with a movable mouse cursor on the screen it is a black screen with a flashing cursor that has not entered Windows yet. Of course you can try everything listed below first as you might get lucky! Hope you do! There are many possible causes when your computer boots to black screen and I will try to mention as many as possible. Some causes of a black screen are incorrect shutdown of your computer, not waking from sleep mode, not knowing where to boot to, corrupt software, damaged start up, and the list goes on.
When moving forward with these troubleshooting tips, make sure you do have a computer that boots to a black screen with a blinking cursor. Otherwise you are looking at the wrong tutorial. This is one that I have had a lot of experience with. People have the Windows sleep mode enabled on their computer and after to going to sleep, the computer does not wake up. This sounds crazy, I know. I have written an article on the computer will not wake up from sleep mode.
When your computer will not wake up try starting your computer in safe mode. Simply start your computer and hit either the F2, Del, or sometimes the F10 key on the keyboard. When you enter Safe mode you should then shut your computer down correctly.
A clean shut down. This should wake up the computer. Then you should disable the power saving mode as soon as you can because it will most likely do it again next time.
To adjust your power saving sleep mode go to the control panel, then choose the power options icon. Did you leave a USB flash drive connected to your computer or maybe an external hard drive? Either way, the computer might be trying to boot to this device but it is not a bootable device. Remove all devices and try to start your computer again.
Below in the comment section one person had a card inserted into a printer and the computer was trying to boot to that so you really need to look outside the box for this step. The computer is trying to find all devices connected to the computer and comes across a problem device. This often causes a black screen with a flashing cursor. If you disconnect the faulty DVD drive your computer can start without errors. People are often aware of a faulty DVD drive because you might have had previous problems removing discs or opening the contents of a disc.
When you see a black screen with blinking cursor you can almost come to the conclusion that your actual computer is fine because it is still running but just not loading into Windows. As we have seen, there are a number of causes which also equally creates a number of solutions. Years ago I had a computer that was hit and miss when starting up. Sometimes it would boot to black screen with blinking cursor and then other times it was fine.
It turned out to be the cd drive.Today, my monitor plugged in the motherboard went completely pixelated randomly and froze my computer so I held down the power button. When I turned it on, I got a windows blue screen saying Kernal error or something along those lines.
Computer Boots to Black Screen with Blinking Cursor
After a few seconds of moving the mouse then stopping, the mouse will disappear. It also randomly displays a loading symbol next to the mouse every few seconds. I can boot into BIOS just fine but not into windows, any suggestions? Was this reply helpful? Yes No. Sorry this didn't help. Thanks for your feedback. Choose where you want to search below Search Search the Community. Search the community and support articles Windows Windows 10 Search Community member.
It also randomly displays a loading symbol next to the mouse every few seconds I can boot into BIOS just fine but not into windows, any suggestions? This thread is locked. You can follow the question or vote as helpful, but you cannot reply to this thread. I have the same question Vijay A. Verma Volunteer Moderator. Hi donnieberry1 I am Vijay, an Independent Advisor. I am here to work with you on this problem. If yes, come out of this and start normally.
Another option when you are in Advanced Options in previous step is to choose Note - You won't lose any files in this step 1. System Restore - This will restore your system to a point when things were working fine. Startup Repair - Startup Repair upgrade fixes all Windows errors and retains all files, applications and settings. Penultimate option could be Reset this PC. Choose this carefully as most likely you would like to keep your files.
All apps will be removed and windows will be reinstalled. Last option could be a clean Install. This is the best method to perform a clean install of Windows Disclaimer - This is a non-Microsoft website. The page appears to be providing accurate, safe information. Watch out for ads on the site that may advertise products frequently classified as a PUP Potentially Unwanted Products. Thoroughly research any product advertised on the site before you decide to download and install it.
How satisfied are you with this reply? Thanks for your feedback, it helps us improve the site. In reply to Vijay A. Verma's post on July 10, So are you pretty certain this is stricly a software problem rather than hardware? Most of time it is Windows issue. We will come to know once your do all the above steps.
This site in other languages x.In this article, we explain what to do if your computer is stuck on a completely black screen with a blinking cursor at the upper left-hand corner when your computer restarts after you click Reboot and Start FixMeStick.
Please select the version of Windows in the index below:. Changing the Boot Mode of Your Computer. If you are not sure what version of Windows you are using, click here to learn how you can find out.
Windows XP. Hold down the power button on your computer until it powers down and remove the FixMeStick device. Press the power button on your computer to turn the computer back on. If you have a login password, enter it. Allow the computer to load to your home screen. If you get a message to format your FixMeStick, please click here. Click the Windows Start logo at the bottom left-hand corner of your screen to open the Windows Start menu as seen in the image below.
A pop-up will ask if you will allow the FixMeStick to make changes to your computer. Click Yes. You will eventually see the end user license agreement similar to the example below.
Click on Accept. The application will then search for updates for your FixMeStick device. Allow the updates to complete. If you get a page asking you to plug in your FixMeStick and it is already plugged in, please click here.
You should then see the FixMeStick logo screen appear. This means the scan is being launched. Click the Windows Start logo at the bottom left-hand corner of your screen.
Locate and double-click on FixMeStick. If you can't find the FixMeStick application, click here. Click on Yes. After this, the FixMeStick application will start and you will see a window that will check for updates. Click the Windows Start logo at the bottom left-hand corner of your screen to open the Windows Start menu.
After this, the FixMeStick application will start and you will see a window that is doing updates appear.Started up my PC. After the Dell Inspiron screen loads the screen goes back with a blinking cursor int the top left corner. I have not tried anything with BIOs settings and have not changed any system settings. The laptop's new. We haven't had it for a week.
If so, and that does not work then I recommend that you contact Tech Support and discuss the issue with them. They may be able to resolve it relatively quickly for you. This black page problem seems to be a universal problem that no one seems to know how to sort or are reluctant to help - even Dell. I have the same problem after downloading Dell updates and I have been chasing my tail for the past week trying to get a solution.
I tried to seek help direct from Dell and I'm still waiting to hear from them so don't hold your breath. If you google this problem you will find dozens of entries trying to get a solution to this, but some are far too technical for me to understand and by reading the replies they don't even work. I wish you the best of luck and hope some one out there can understand our problems and sympathise with the frustration of feeling alone and come to your aid. I spent a couple more hours trying things.
I was unable to get into Safe Mode, couldn't boot windows from the disc, ect. They said the motherboard was "bad". They took an exchange with no issue and I haven't had problem with it so far. Thanks for the replies. I recommend you get your hardware looked at as I don't think it's a software issue. The first thing that comes to mind is the LED's for the num, caps and scroll locks. They are coded to be able to tell what is wrong with your system, a crucial piece of information there is whether or not you can toggle the LED's by hitting the num, caps, and scroll lock keys.
The next step would be to enter the Diagnostics and run a full diagnostic, if it gives a diagnostic code, then the next step is to find the codes meaning. This is the first piece of positive advice I have had with this issue - while I may not fully understand what you are saying the LED for Num has switched on my memory that the F12 button does not always work and I notice that this only happens if the led light indicator is not on?
If I leave the computer to boot up it goes by the Dell page then goes to the black page with the white curser flashing in the top left hand corner. If I use the down arrow and highlight the section Hard Disk Sato-o WD3 AAksB3AO and press return the computer then works okay for the duration of that period, as soon as I switch the computer off I have to go through the above procedure again.
Is there some way of changing the selection in the boot menu from the Removable USB which does not work to the Hard Disc-Sato which does? You are then encountering the black screen because there is no Operating System to boot from the USB device, so you hit F12 to get to a one time boot selection, and you choose to boot from the HDD, which then boots your OS succesfully. Once there you will see a list on the left hand side of the window. Then in the top right hand corner is a box showing all of your boot options, with arrows to the right of the window.
You need to select the hard drive in that window and then click the up arrow on the right of the window and move it to the top. You can also uncheck the USB Storage Device option as well as the Diskette Drive option if you wish, since they are going to be of little use to you. I too am having the same problem with my dell inspironthat I just purchased a few moths ago. I called dell and without them doing remote control access to my computer,they simply told me that it was an OS problem and that it would cost me extra money to fix the problem.
And they charged me to"repair" my laptop where they told me that tried to repair the problem, but it kept going back to the blk screen with flashing wht cursor. Right now,I've been communicationg, through email, with a customer service rep for several weeks with no resolution as of yet. I lost virus protection software,microsoft office software that I needed for my classes,school work, downloaded music,and pics, which I paid for and dell is not going to repair or replace my computer let alone compensate me for the software and information I lost.After upgrade on my HP probook, windows7 will not start.
All I get is a black screen with a flashing cursor. I do not have the discs for Windows 7 and I have never done a back-up to my computer on discs or other hard drive. All that is available upon start up is the HP system check and restore to factory settings by pressing the escape key. Why is my screen black when I start Windows 7? Saving any needed data and re-installing Windows 7 might be the best option though here are a few others.
You can save your files by putting the drive in another computer or an external drive case and then backing them up. Do so using several methods in a redundant manner. Of course a real computer shop or your System maker can help recover the files. Or you could use an Ubuntu boot CD to back up the data.
Repeatedly tap F8 as you boot? Safe Mode is reached by repeatedly tapping F8 as you boot up. First check this thread in case its a simple one and if not come back to this thread. Black screen issues are extremely tough to repair and any fix is usually on a hit or miss basis.
That there is no information on a black screen like there is on a blue screen just adds to the difficulty. Often using a restore point nor startup repair will have any effect. You can try a google to see suggested repairs some of which have worked however these cover a wide field of efforts. You can try System Restore from it. If you do not have the disks your system maker will sell them cheap.
Or try from Safe Mode if you can get there. Try Startup Repair. What are the system recovery options in Windows 7? If nothing works you can do a repair installation.
Use these methods to replace the registry with a backup.